เลือกประเทศหรือภูมิภาคอื่นเพื่อดูเนื้อหาสำหรับที่ตั้งของคุณ
สหรัฐอเมริกา
10:04:20 GMT+0000 (Coordinated Universal Time)
GAR60-DO-2RS
Rod end
Rod end with external thread, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN ISO 12240-4, dimension series E, type M, sealed design
ข้อมูลผลิตภัณฑ์
เมตริก
อิมพีเรียล
Main Dimensions & Performance Data
| Cr | 318,000 N | Basic dynamic load rating, radial |
| C0r | 405,000 N | Basic static load rating, radial |
| d | 60 mm | Bore diameter bearing |
| D | 90 mm | Outside diameter bearing |
| l2 | 277.5 mm | Total length external thread head |
| B | 44 mm | Width inner ring |
| d2 | 135 mm | Outer eye diameter |
| ≈m | 5.94 kg | น้ำหนัก |
Mounting dimensions
| d1 | 66.8 mm | Outer flange diameter inner ring |
| r1smin | 1 mm | Edge Spacing |
Dimensions
| dK | 80 mm | Ball diameter |
| d3 | M52x3 | Thread size |
| h | 210 mm | Shank Length External thread rod |
| C1 | 38 mm | Width of the rod end |
| α | 6 ° | Tilt angle |
| l1 | 115 mm | Shank Length External thread head |
| l7 | 75 mm | Distance drilling with/shaft start |
| dOT | 0 mm | Bore diameter bearing, upper tolerance |
| dUT | -0.015 mm | Bore diameter bearing, lower tolerance |
| dT | 0,015 | Bore diameter bearing, tolerance |
| BOT | 0 mm | Width inner ring, upper tolerance |
| BUT | -0.15 mm | Width inner ring, lower tolerance |
| Gr | 0.043-0.12 mm | Radial Clearance |
| Grmax | 0.12 mm | Radial clearance, maximum |
| Grmin | 0.043 mm | Radial clearance, minimum |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 130 °C | Operating temperature max. |
ดาวน์โหลด:
ตัวเลือกสินค้าปัจจุบันของคุณ
| Clampable | Not clampable | |
| Maintenance | Maintenance required | |
| Mounting | External thread | |
| Lubrication nipple | DIN71412-AM6 (tapered grease nipple) | |
| Slotted | No | |
| Thread Pitch | Right-hand thread | |
| Sealing | 2RS | Lip seals on both sides |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
คุณลักษณะ
